Branding

Branding can easily be screen printed on any side of the furniture.

Process

100% Design Tokyo

My piece of furniture is designed for seating at the 100% Design Tokyo Event.
I have identified 3 main places where the furniture can be used. Bar, Exhibition and Container Ground.

Concept Refinement

Once I had selected one concept out of the few that I was working on, I approached concept refinement stage by making a series of 1:3 scale models.
Once a mock-up was completed, I then analysed each individual model to see where it's faults and weaknesses were.
I then improved the structure and layout and implemented the changes in the next model.
This process allows my design to evolve and improve rapidly.

The next series of images show how my designs have evolved through more than 10 scale models.

Model 01

This was a basic 6-sided unit inspired from an origami form.

Model 02

I changed the dimensions to make it more stool-like and less cube-like.

Model 02a

I tried increasing the height by double, but this caused a drastic change in the form that was unexpected.

Model 03

I worked with inverting some of the corners to acheive different contours.

Model 04

After changing the height and changing some angles, this model was beginning to show signs of a more appropriate proportion.

Model 05

In this model, I was working with tapering the base, however, it became more unstable.

Model 06

In this model, I experimented with creating some inward angle to try and change the direction of the load stress from vertical to horizontal.

Model 07

I curved the base of this model to experiment the possibility of a slight 'rocking feature'.
It didn't work.

Model 08

In Model 08 i began experimenting with various locking systems and how an internal skeleton or cross section could further strengthen my stool design.

Model 09

In model 09 I was still working on locking systems.

Furniture: 3 Concepts

These are the initial concepts I have developed for the event 100% Design Tokyo.